As a service to the Ford Escape Hybrid and Mercury Mariner Brakes
Ford Escape and Mercury Mariner hybrids have regenerative braking. They make a car every five minutes for the system under pressure. If you disable the auto-test, could be seriously injured during the replacement of brake performance. The following is the procedure step by step on the brake service brakes in safe mode (Betcha):
ignitionn put the vehicle in park.
Press the brake pedal.
With your foot on the brake pedal, turn the keyOff, then 3 times. Then let the brake pedal. This must be completed in less than three seconds.
When you have this done correctly, the brake warning light flashes when the stored hydraulic pressure is released. Remained in both the pressure is released.
You can now service brakes. After the repair, you must activate the regenerative brakes to turn the key on and off. Leave the key in place.
When you're done, you must leaveBTCC. To do this, press the brake pedal down while turning on the switch and back. This creates pressure in the system. The brake warning light should go.
This is just one of the things that you are aware of the need for maintaining the Ford Escape and Mercury Mariner Hybrid. Still in the maintenance manual for safety information systems at or near high-voltage work.
5:38 PM
|
Labels:
Brakes,
Escape,
hybrid,
Mariner,
Mercury,
service
|
This entry was posted on 5:38 PM
and is filed under
Brakes
,
Escape
,
hybrid
,
Mariner
,
Mercury
,
service
.
You can follow any responses to this entry through
the RSS 2.0 feed.
You can leave a response,
or trackback from your own site.
0 comments:
Post a Comment